How to install The Nest Hello doorbell with an Indoor Power Supply

You are here:
  • Main
  • How to install The Nest Hello doorbell with an Indoor Power Supply
< All Topics

Occasionally we come across a home that was built without the Wiring for a doorbell. is that case we need to install an Indoor Power Supply. Please tell the customer to order the part with one of the other of these two links

……………………………………………………………

From the Google Store

From Amazon

Either source will ship it and give you an Estimate Time of Arrival. You (the crew member) should plan on returning and finishing the install after the part arrives.

……………………………………………………………

Nest Install Guide

CLICK HERE TO OPEN The guide that will walk you through Nest Doorbell and Camera Troubleshooting guides

e guide.

……………………………………………………………

Note: The Indoor Power Supply” is one of these block transformers like many folks us to charge their Calculators etc. One additional tool that you will need is an 8 inch long 3/8”drill bit and an electric drill to drill the hole needed to pull the wire through the wall.


Special Tool Needed

9 inch 3/8 inch drill bit to connect

……………………………………………………………

When you install the wire inside the home make the wires as neat as possible kind of like these examples

  

……………………………………………………………

Nest Tech Support

Nest Support Resources
If you are having issues with this Install then please contact the experts listed below.
Pro Support   855-VIP-NEST    (855-847=6378) [24/7] https://support.google.com/googlenest?hl=en#topic=7029097
pro@nest.com

……………………………………………………………

CLICK HERE: to give us any feedback on this guide. What would you like to see included/changed?

 

Table of Contents